-
Q:Bike CompatibilityThe Xplova NOZA is compatible with most bike styles and types; however, exclusions may include various single speed, track, recumbent, and some thru axle bikes.
- Hub Types: 130 / 135mm Quick Release, 12x142 / 12x148mm Thru Axle
- Rear Wheel Size:
Road: 650c, 700c, 650b
Mountain: 24", 26", 28", 29"
- Drivetrain (With Additional Purchase): 8/9/10/11 Speed SRAM/Shimano
-
Q:Device CompatibilityWindows / Mac
The Xplova NOZA supports various Windows and Mac applications with Bluetooth and/or ANT+ capabilities.
3rd Party Applications
The Xplova NOZA knows the ANT+ FE-C & Bluetooth protocol, so is compatible with many 3rd party apps, including Zwift, TrainerRoad, PREPRO, Bkool, Onelap, Thinkrider, Road Grand Tours, and many more.
-
Q:Design SpecificationsDimensions (installed): 620*518*453mm
Total Weight (unboxed): 16.5 KG
Flywheel Weight: 5.7 KG
Sound Level: 58 dB (@30KPH)
Maximum Power Output: 2500W (@58KPH)
Maximum Simulated Incline: 18% (@70KG)
Resistance Type: Electromagnetic
Accuracy: + / - 2.5%
Connectivity: ANT+, ANT+ FE-C, and Bluetooth Smart
Firmware Upgradable: Yes
Electrical Requirements: 100-240V~1.5A 50-60 Hz
-
Q:In the Box1. Xplova NOZA
2. Front Leg
3. Rear Leg
4. Nuts (x2)
5. Bolts (x2)
6. 1.8mm Spacer
7. Drive Side Adapter for 130mm and 135mm Quick Release
8. Drive Side Adapter for 12x142 and 12x148 Thru Axle
9. Reversible hub spacer for Thru Axle
10. Height Adjustment Knob
11. Hex Tool
12. Quick Release Skewer
13. AC Power Adapter
*Caution: use of 3td party power adapters not supplied by Xplova may cause permanent damage to your Xplova NOZA
-
Q:Product CareThe Xplova NOZA requires minimal cleaning and maintenance if dirt or grime collects. If cleaning is needed, clear any debris and use a moist, soft cloth to wipe surfaces, avoiding dripping moisture into any part of the Xplova NOZA itself. Also avoid using strong cleaning agents as these may damage or reduce the lifespan of your Xplova NOZA.
-
Q:How do I know if my bicycle is compatible with NOZA?Drive Side Adapter for 130mm and 135mm Quick Release
Drive Side Adapter for 12x142 and 12x148 Thru Axle
It is recommended to bring your bicycle to your local Xplova sales store to have the full product experience before purchasing.
-
Q:Quick Start GuideDownload the Full Xplova NOZA Quick Start Guide as a PDF for instructions.
-
Q:Does the Xplova NOZA need to be zero reset/calibrated?No. The Xplova NOZA is designed to automatically zero reset itself when it is connected to a power source. Therefore, when the power cord on the unit is unplugged then replugged, the controller will zero reset itself automatically. To ensure power accuracy, do not ride on the unit 10 seconds before reconnecting the unit to a power source.
-
Q:Is spindown necessary for the Xplova NOZA?No. The Xplova NOZA uses an automatic spindown system that automatically adjusts the tension of the belt to keep mechanical wear and tear consistent at all times. Slight wear of the belt from prolonged use will not affect the mechanics of the unit, so there is no need to perform spindown.
-
Q:Indicator Light DescriptionsWhen you connect the trainer to a power source, the indicator light will change from red to blinking green. This light signal means the trainer's control board is performing auto testing and zero reset. When the light is blinking green, it means the control board has completed testing and auto zero reset. At this time, the unit is in stand-by mode and ready to be used.
-
Q:Indicator light is redControl board auto testing and zero reset is still in progress and not completed yet.
*Attention:
1. Under normal circumstances, this process is completed within 2 - 4 seconds after connecting to a power source.
2. To ensure power accuracy, do not use the trainer before auto zero reset and testing is completed.
-
Q:Indicator light is blinking greenAuto testing and zero reset completed. You can now connect the unit to a 3rd party simulation software and ride as usual.
-
Q:Indicator light is constant greenIt means the unit has been successfully paired and connected with the Bluetooth device.
-
Q:Indicator light is blueTrainer is switched on and powered.
*The indicator light will light up blue when the user is riding on the trainer and connected via Bluetooth or ANT+.
-
Q:Why is the indicator light off?Here are some possible reasons why the indicator light is off:
1. Not connected to a power source:
Please check if the power cable is connected properly.
2. Bad connection between the power supply plug and trainer base:
Please unplug and replug the power supply. If the unit is still unable to function normally, please contact your distributor to replace the plug or power supply.
3. Power supply malfunction:
Check if the indicator light on the power supply lights up. If it doesn't, please replace the power supply. Please refer to the manual for the specifications of the power supply for this trainer. The use of any power supply of a different specification with this trainer is prohibited.
4. If none of the above solves the problem, please contact your original dealer or service centre for assistance.
-
Q:Why is there a severe deviation in power?Power zero reset malfunction:
Zero reset the trainer by unplugging it from the power source, waiting for 20 seconds, then replugging. Do not pedal or move anything on the unit for at least 10 seconds before replugging.
-
Q:I am unable to connect via Bluetooth. Why?Here are some possible reasons why you are unable to connect via Bluetooth:
1. Not connected to a power source: Check if the power cable is connected properly and if the light signal is normal.
2. Bluetooth is not enabled on your 3rd party simulation device: Check if Bluetooth is enabled on your phone or computer.
3. If none of the above solves the problem, please contact your original dealer or service centre for assistance.
-
Q:The connection is working but the power seems low?Here are some possible reasons why the connection is working but the power seem low:
1. Power zero reset malfunction:
Zero reset the trainer by unplugging it from the power source, waiting for 20 seconds, then replugging. Do not pedal or move anything on the unit for at least 10 seconds before replugging.
2. If none of the above solves the problem, please contact your original dealer or service centre for assistance.
-
Android 1.0.0.045 /1.8(1) Release Notes1. Switch between imperial or metric units in measure
2. Capbility to show 3rd party app feedback when paired
3. Optimize user interface (UI) for connect with Noza smart trainer
Optimize incline/decline traing mode
Optimize resistance simulation mode
4. Calibrate synchronization with iphone SE/iPhone 5 user interface (UI)
5. Bug fixes
-
Android 1.0.0.031 /iOS 1.5(12) Release Notes1. Add Route simulator function.
2. Add load mode control in free ride.
3. Support BLE HR & BLE Cadence Sensor.
4. Increase several power adjustment function in training mode.
5. Improve BLE devices connection.
6. Bug fix.
-
NOZA Firmware BT204.1.4.02 Release Note● Before updating firmware, please make sure your Xplova Workout App is the latest version.
● Make sure Xplova Workout App is connected to Internet.
● Make sure Workout App is paired with NOZA.
● Troubleshooting
NOZA will reset automatically after receiving firmware update. If it cannot be connected after firmware update, users can simply unplug then plug in the device again to solve this issue.
-
NOZA BT204.1.4.03 Release Note● Stability improvements